If it is the motor then a used seat may be your best option as you don't need to take a apart your seat to install it Your power seat won't move front back Visually inspect the power seat switch for signs of corrosion, burn marks, moisture, or physical damage
Subaru Outback (BR) - Power Seat System - Seats
Look at the connector pins as.
Diagnose a failing driver's side power seat and learn what to look for when buying a used replacement wiring harness for.
Common signs include a seat failing to move in one or more directions, intermittent movement, or a complete lack of. I extracted and put together the pages that should lead you through testing the power seat. Diagnose and replace the driver's power seat switch (64176sj000) in your subaru and learn about common failure. My power seat randomly stopped working one day and it’s stuck in the completely back position
Should the power seat switch fail, it will be almost impossible for you to adjust your seat Since both front seats stopped working at the same time, i could assume it wasn't the switch. Recently the power front seats in our 2012 subaru outback stopped working This is because there's a constant 12 v supply to the seat control switch (the motors work even with the ignition key out),.
Then give the fluid several minutes to evaporate before turning the ignition on and trying the switch
The switches for the seat adjustment don’t connect directly to the seat motors, they signal to. My power seat switch (05 outback) snapped off Can anyone point me to instructions on how to replace it I had the occasion today to remove the front passenger power seat, to remove whatever was under the leather seat.
I've seen lots of posts here and elsewhere on the following problem
