The car seems to idle normal but with a high temp reading then drops down a bunch after it warms. The sensor on the back of the block. I'm at a loss and looking for some input
New Engine Coolant Temperature Sensor fits Mazda 3 5 6 MX-5 Miata CX-7
98 gt 2v gauge coolant temp sensor replaced and connector as well as the pcm.
I'm thinking it's a very good chance that the temp sensor ground is going ape ****
After i did my reroute, my needle was. I have been experiencing an odd twitch in my coolant temp gauge lately It seems to come and go, and ranges from a. When the gauge reads low, stays pegged, or shows erratic behavior, it can signal a problem with sensors, wiring, or the.
The temp gauge sensor is on the back of the engine and i believe is difficult to access There is a photo some where on. In the winter and in the summer it stays the same temperature Then it should be fine
I have a '99 miata, and i did a qmax coolant reroute about a year ago
Since then, my temp gauge has been reading inaccurately My temp gauge has started reading as hot after replacing my coolant temp sensor I used an obdii scanner to watch the temps. The temp gauge reads fine when i'm driving, but when i come to a stop, jumps to about the 1 o'clock position
A malfunctioning coolant temperature sensor can lead to various issues that affect engine performance and overall. Attempting to remove the coolant temp sensor on my 1999 miata because i’m fairly sure this is the issue why my cooling fan will not. The coolant temp sensor is on the back of the block where you previously hinted at looking
