I noticed some oily substance near the clutch pedal Put in a exedy twin hd about 1500 miles. Is your clutch pedal stuck to the floor
Viamoto Mitsubishi Car Parts Clutch Master Cylinder - Mitsubishi EVO 7
Learn the common causes, simple checks, and repair.
A pedal that is suddenly soft and sinks to the floor with no resistance points to a hydraulic system loss (fluid leak from master or slave.
I tried bleeding the clutch line but when i depress the clutch pedal with the bleeder screw open, the master cylinder. Clutch pedals may stick to the floor for many different reasons Here is the list of the most. If you find that your clutch pedal is stuck to the floor, you’ve lost the hydraulics in your clutch system
Now today on the way to the gas station the clutch pedal went to the floor At first i could put in gear but as i got closer to. Clutch is carbonetic twin (very hard on clutch pedal) and master cylinder iz new (with reinforcement ring), only. The two components that would cause this would either be your slave cylinder or you master cylinder
Most people don't want to have to mess with finding the perfect bore size so pedal isn't too stiff, changing to braided.
I've read countless threads about the cmc popping and the pedal getting stuck on the floor, but i have different. Has the clutch master cyl (next to the brake master cyl) lost any fluid ? (even if there is some fluid in it the slave can. I just had my clutch master cylinder replaced under warranty today because i was hearing a click noise when i would.
