Using fuels with percentages of ethanol or methanol higher than. Here is a comparison of e85 vs water/methanol with the same total timing of 18 degrees The injectors i've gone with are a bit oversized for e85 so they'd probably be fine with methanol if i turn up fuel.
Water Injection vs. E85: Unleash Your Engine's Potential - cool
From my limited understanding e85 does a really good job at producing high power with high boost due to its lower potential energy.
Personally i think e85 is the best option to go with, it not only gives you the sufficent octane to run high amounts of.
So decided test out vp racing m5 methanol vs vp c85 vs sunoco pump e85 (tested in at 92%) fuel on my mild motor. In terms of a meth setup on this car Single nozzle setup is fine, if you're not trying to push the boost over the factory. While both fuels are oxygenated and highly knock resistant, they behave very differently in terms of required volume,.
If you're running e85 meth injection upstream of your iat sensor will give you a lower temp reading At very high boost levels e85/e98 can be problematic and you can quite possibly still end up with knock occurring. Meth injection makes a lot of sense for people that have to run standard 91/93 octane since this fuel limits the power you can make. 2003 honda element (stock engine, really, no kidding) tc's performance turbo kit, air/water aftercooler, hondata.
Can i use e85 in my honda engine
Using fuels with percentages of. It is a given that e85 will do more than methanol injection system, but the question is can methanol injection help. I’ve heard a few conflicting ideas around meth injection, and how it’s bad for seals and gaskets but other sources say it’s. I have not seen a complete list of pros and cons, so put one together myself
I attempted to list these in the order of.
