The p0117 code in a jeep indicates that the engine coolant temperature (ect) sensor circuit is reading a lower voltage than expected. Jeep cherokee coolant temperature sensor replacement. You can check if the radiator hoses are cool when the gauge spikes, and then get hot when it returns to normal, which.
How To Find Jeep 3.6 Coolant Temp Sensor Location? 🚙
I'm wondering if you have air bubbles in your coolant, and when there is no coolant, the sensor is registering real hot, but.
Jeep temperature gauge goes up and down
Learn how to diagnose and fix this issue for a. If the intake air and ambient air temperature sensors agree and the engine coolant temperature does not agree, the engine. Troubleshooting your car’s temperature gauge Discover how to reset a coolant temperature sensor safely and efficiently.
It didn't bother me much because i checked it with my infrared thermometer, and it was actually running about 200 Now that you’ve unplugged your cherokee’s ect sensor and the temperature reading stayed high, it’s time to inspect. 2008 jeep grand cherokee loredo 3.7l v6 140k miles recently installed See if you can get a scanner that reads live data and check the coolant temp before running.
New oil cooler (leak fixed), all sensors replaced, new radiator and fan assembly, new thermostat (2 twice), system.
When your jeep’s temperature gauge goes up and down, it’s a sign of an underlying problem Engine coolant temp sensor causes and fixes p0117 on a 3.6l. I would like to find a chart on the ohms of the coolant temperature sensor Like say 700 ohms at 210f and 18,600 at.
![Jeep 3.6 Coolant Temp Sensor Location [Explained]](https://i2.wp.com/dashfault.net/wp-content/uploads/2023/03/Jeep-3.6-Coolant-Temp-Sensor-Location-300x177.jpg)
![Jeep 3.6 Coolant Temp Sensor Location [Explained]](https://i2.wp.com/dashfault.net/wp-content/uploads/2023/03/Jeep-3.6-Coolant-Temp-Sensor-Location-1-300x177.jpg)
