Jack the rear of the car up and put it on jackstands The fifth and sixth generation corvettes are engineering masterpieces Remove the sway bar (2 bolts/2.
Corvette C5 Exhaust System: Borla® Performance Cat-Back Aftermarket
(read instructions prior to installation.) it is recommended to not fully tighten the exhaust until it has been fully installed
Secure vehicle on jack stands (refer to your manual for.
Before installing the valve linkage, assure that the exhaust valve is moving freely If the valve is dragging, loosen the exhaust valve hardware and adjust the doubler plate to eliminate dragging. Corsa branded exhaust systems are backed by a limited lifetime warranty for as. It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your borla performance exhaust system.
Included with your borla performance exhaust system is a warranty card Please read it carefully before you begin any work on your vehicle If you should have any. Installing an exhaust system is not difficult, especially with a lift to raise the car
If not, the original exhaust system pipes can be.
Borla performance industries recommends that an exhaust shop or professional after market parts installer, who has all the. While many enthusiasts choose to have a shop perform the work, a cat‑back install is accessible to a confident diyer with basic hand tools and a weekend afternoon From the cats → back, to the rear of the car You guys have to stop giving the stealerships money
Or just donate the funds to. If you’re noticing an increase in noise or unpleasant smells.
