Close to a month ago i bought a used 2013 focus st st3 from the dealer i actually work at right after it was traded in Besides keeping charge temps near 10* of ambient i also noticed lower oil temps on the track Car had a accessport with a freek tune stage 1 map and a treadstone front.
Damond Motorsports Focus ST Engine Oil Cooler Kit Install Guide
After pulls to around 7k rpm, i would get blueish/white smoke and smell burning oil
Then after a pull and stopping, i would get smoke once i started to move again.
I did notice last time i took me intake pipe off from the turbo there was a lot of oil at the bottom of the pipe However the turbo seems to be building boost fine, and. Just after potential issues with my engine, i recently had an engine installed after my old one cracked a liner and the new engine has started burning oil. Recently, my st has been burning puffs of oil out the exhaust after boost
I have only ever noticed the burnt oil smoke after harder acceleration, never with normal driving/acceleration. Just after potential issues with my engine, i recently had an engine installed after my old one cracked a liner and the new engine has started burning oil after about 100 miles of gentle driving. There are bolts on the bottom of the fmic, it’s a little tricky getting the top nut situated but i was able to slide it over the top and hold it with one finger to get the bolt in and tightened. If you own a ford that’s causing a burning oil smell, this is most likely something you want to fix right away
Below we’ve created a list of the three.
