Lubricate the inner surface of the bushings with any consistent grease to facilitate the installation into the sway bar end links The end links connect the lower control arms of each side of the suspension Install the inner thrust washers and bushings on the end link.
E90 BMW Sway Bar Bushing Replacement - YouTube
In this quick diy repair, i remove the old stabilizer bushing, clean the rusted bracket, and install a fresh new bushing to bring the suspension back to life
If your car clunks or feels.
The sway bar bushing actually mounts on a removable bracket Which has the 14mm (one is a subframe nut The other is a through bolt into the rear suspension cradle At least on my experience usually the problem with this style of fastening is the rust on the bolt behind the threads
If you could wire brush and oil that it would help a lot but unfortunately that's normally not. Key red flags include play in the joint, visible rust on the ball stud, or cracked bushings If you’re a typical user, you don’t need to overthink this Match your vehicle’s make and model, prioritize.
Remove the end links from control arm and stabilizer
Dismount remaining inner bushings and thrust washers Clean sway bar, thrust washers,. Sway bar end links are the attachment points between a sway bar and suspension members Clean and remove any rust or scale from the sway bar
Of the bushings and the contact area of the sway bar prior to installation Rotate the stabilizer bar back. Sway bar end link replacement Video tutorial on how to replace a sway bar link
Normally the bushings will wear out over time, but in this scenario the center bolt.
How to remove and replace your sway bar bushings and end links Also inspection procedure and other very useful tips Links to tools and equipment used in th. The sway bar counters this roll
