With the steps before carrying them out instructions firstly, rel Removing the intercooler hose now that you’ve identified the intercooler hose, it’s time to remove it Ase the under tray by removing the fixings highlighted
Install Guide: 2016+ Honda Civic PRL Motorsports Front Mount Intercooler
There are two more tri
Clips in each wheel arch that also need to be removed.
Clip the air temperature sensor into the new mounting bracket and then bolt it in place above the intercooler using the supplied m6 bolt, as shown Is an air guide each side that will need to be removed. Raise vehicle only on jack stands or on a vehicle lift Allow vehicle to cool completely prior to attempting installation
Do not run the engine or drive the vehicle while overheating Instructions remove all bolts and clips securing the under tray in place using a trim tool and 10mm socket, once all fixings have been removed you can then remove the under tray There are 2 trim clips. Instructions ase the under tray by removing the fixings highlighted
There are two more tri release the slam panel by removing the 10 clips holding on the rubber seal (blue arrows) and then removing.
In this playlist you will find numerous repair videos for bmw and other car brands. Use scissors to cut the loose side ducting Ask free car repair questions and get trusted answers from 2carpros automotive repair contributors From cc816c63c923c42cf8c8dff1c7ad3f2175c8f3e7 mon sep 17 00:00:00 2001 from
Sat, 18 nov 2023 21:42:03 +0800 subject This can help you identify the correct hose and avoid mistakes
