Service intervals should be established based on track conditions, but a general rule is to inspect and service after every three races or every 1,500. Dst will provide some detailed instructions for lubricating a ball joint with or without a grease zerk fitting. After lubrication, perform a thorough inspection of all suspension boots and fittings
Grease Fittings FAQs
Look closely for signs of splitting, cracking, or damage to the rubber seals, as a compromised boot allows contaminants to.
Essential maintenance guide for track cars between events
Learn what to check, replace, and upgrade to ensure reliability and performance on track days. Before starting, take time to inspect the parts for damage Examine the boots for damage and splitting In addition, be sure to check for loose play and other signs.
The csrs carry spares for cars and are present at the track for scca weekends However, if you are running test days and track days without csr support here is. Discover essential suspension maintenance tips for track cars that enhance performance and longevity Learn care strategies tailored for track use.
In this article, we’ll give you a checklist of things to look for when inspecting the chassis and suspension
Engines and drivetrains are a whole ‘nother can of worms that we won’t get into here. Visually inspecting the underside of the vehicle for these small metallic nipples will reveal the lubrication schedule for your specific chassis Locating all the fittings before starting the process. You know that greasing chassis parts is important to the health of a vehicle, but the tight space of the engine compartment and awkward part placement can make.
Excessive pressure ruptures the joint’s protective seals, allowing water and debris to enter Once filled, detach the grease gun and wipe away any excess grease to prevent it from attracting new dirt and. How to make sure your car passes tech before a track day worried you might fail tech inspection Check these things before you head out.
The answer is from your suspension
After greasing each chassis part, be sure to wipe the grease fitting and surrounding area clean to prevent contaminants from building up on and around the grease. Wheels, tires, suspension, brakes is the short list that separates a confident lap from a nervous one If you treat the car like a tool,. How do you properly grease a ball joint
